Block the IPs of the attackers specifically in your iptables rules. Make sure the users that they attempted to log on w/ are disabled, password changed or non-real users. Change root password. It looks like you are already working to allow only your IP to ssh, that's good. Check the other boxes and see if they have been compromised. You should also contact the ISP they are coming from and inform them of the break-in if they did in fact get in to your server.
This is where a separate logging firewall w/ snort would help you. You could see how many and what kind of attack attempts were made before they got in.
Brian Kelsay
Quoting Brian Kelsay [email protected]:
Block the IPs of the attackers specifically in your iptables rules. Make sure the users that they attempted to log on w/ are disabled, password changed or non-real users. Change root password. It looks like you are already working to allow only your IP to ssh, that's good.
There used to be an application called "Port Sentry" that I ran back in the RH 6.2 days. Port Sentry would monitor all incoming connections and would add a deny rule to hosts.deny for hosts that tried to connect to some port more than some given threshold. It was pretty handy and may even still exist.
Anyone know of anything else like this? I'm too busy to google at the moment.
-- Dave Hull http://insipid.com
On Thu, 21 Oct 2004 11:02:31 -0500 Dave Hull [email protected] wrote:
Quoting Brian Kelsay [email protected]:
Block the IPs of the attackers specifically in your iptables rules. Make sure the users that they attempted to log on w/ are disabled, password changed or non-real users. Change root password. It looks like you are already working to allow only your IP to ssh, that's good.
There used to be an application called "Port Sentry" that I ran back in the RH 6.2 days. Port Sentry would monitor all incoming connections and would add a deny rule to hosts.deny for hosts that tried to connect to some port more than some given threshold. It was pretty handy and may even still exist.
Anyone know of anything else like this? I'm too busy to google at the moment.
Port sentry still exists.
--------------------------------- Frank Wiles [email protected] http://www.wiles.org ---------------------------------
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Brian Kelsay Sent: Thursday, October 21, 2004 10:58 AM To: [email protected] Subject: Re: It was bound to happen - suspected hack
Block the IPs of the attackers specifically in your iptables rules. Make sure the users that they attempted to log on w/ are disabled, password changed or non-real users. Change root password. It looks like you are already working to allow only your IP to ssh, that's good. Check the other boxes and see if they have been compromised. You should also contact the ISP they are coming from and inform them of the break-in if they did in fact get in to your server.
This is where a separate logging firewall w/ snort would help you. You could see how many and what kind of attack attempts were made before they got in.
Amen to that. And if you wind up in court, it's pretty handy for an expert witness to be able to point to the actual packets themselves. I log, and archive the entire data stream in/out of my network for this, and other purposes.
My primary purpose is to be able to replay data for analysis. This could be to facilitate troubleshooting, but that's rare. More often than not, I want to "see what really happened" on the wire. The second good reason for this (Nimda/Code Red started me down this road) is the ability to replay the network stream through an alternate Snort configuration, with new signatures in place. This way, when a zero-day monster occurs, I can go back as far as I like to look for the attack once I have a good signature in place.
Dustin
Quoting Dustin Decker [email protected]:
Amen to that. And if you wind up in court, it's pretty handy for an expert witness to be able to point to the actual packets themselves. I log, and archive the entire data stream in/out of my network for this, and other purposes
What kind of storage space is required for this? How long to do you keep all that traffic? That sounds impressive.
-- Dave Hull http://insipid.com
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dave Hull Sent: Thursday, October 21, 2004 11:21 AM To: [email protected] Subject: RE: It was bound to happen - suspected hack
[snip]
What kind of storage space is required for this? How long to do you keep all that traffic? That sounds impressive.
Well, it depends on a number of factors - primarily the speed of the link being monitored, and the utilization of the link as well. Monitoring 10/100 is pretty well sustainable without packet loss. Moving into gigabit is another world entirely.
I have been known to use the client components from the SHADOW IDS project to log traffic into binary tcpdump format, on one hour boundaries. Thus, I wind up with files like:
-rw-r--r-- 1 ids ids 3043 Oct 21 02:00 tcp.2004102101.gz -rw-r--r-- 1 ids ids 7076 Oct 21 03:00 tcp.2004102102.gz -rw-r--r-- 1 ids ids 1456 Oct 21 04:00 tcp.2004102103.gz -rw-r--r-- 1 ids ids 160916 Oct 21 05:00 tcp.2004102104.gz -rw-r--r-- 1 ids ids 9574 Oct 21 06:00 tcp.2004102105.gz -rw-r--r-- 1 ids ids 194180 Oct 21 07:00 tcp.2004102106.gz -rw-r--r-- 1 ids ids 161428 Oct 21 08:00 tcp.2004102107.gz -rw-r--r-- 1 ids ids 5623292 Oct 21 09:00 tcp.2004102108.gz -rw-r--r-- 1 ids ids 638976 Oct 21 09:36 tcp.2004102109.gz
I've a handful of methods to pull the files from remote sensors which I monitor, etc. and clean the sensor hard drive to ensure I don't run out of disk space. I have as of late been moving toward the use of IDABench, which is based on the SHADOW IDS, which functions nearly identical but is a bit more current vis-à-vis features.
You can see the file sizes on the snippet of directory listing above. The particular sensor this is from is on a DSL link which can sustain 5.99mpbs inbound, and 384kbps outbound, so storage isn't a huge issue. What's important is to pull the files from the sensor frequently enough to ensure your logging partition isn't getting full. (<= 24 hours for me, depends on client. I have one for which I'm running an hourly pass.)
I can generally store about a month of compressed files on a CD, which is a good immutable storage mechanism if I need to present them in the future.
Folks who are really interested in going down this road will find Snort 2.1 Intrusion Detection 2nd Edition as useful as the Stevens TCP/IP bible. It's from Syngress press, and a host of contributing authors. 'Tis around $42.05 @ MicroCenter.
There are several vendors out there that like to throw around the buzz-phrase "real time"... don't believe the hype. In my experience, anything less than $50K will only get you to within the past half an hour at best... and you still have false positives (or worse, negatives) to deal with.
What did Bruce Schneier say? Oh yeah, "Security is a _process_, not a _product_." And much like Neil Stephenson pointed out on /., the hardware is there, but software is still pretty much shit.
Dustin
-
Brian Kelsay -
Dave Hull -
Dustin Decker -
Frank Wiles