DamnSmall works on as little as 16MB of ram, BUT if you want to use Open Office you better bump that up to 128 or higher. When using DamnSmall from CD, they recommend 384MB, but I've used 128 just barely.
Brian Kelsay
docv <> 09/27/04 06:11AM >>>
Oren,
I have some old PI (both 133 and 166 respectively) systems that have 1.2 and 2.0 Gig HD's in them that could be taken out and used in their current box. I'd be happy to donate them to the center (and my wife would be happy to get rid of another one of the 10 or so boxes in the garage!).
As for the OS, I have installed Red Hat 8.0 on one of the 166 boxes and it ran rather sluggishly, but these boxes only have 16 Meg of RAM, if memory servers me correctly. I have since switched to using Debian or Knoppix as an OS for most all my boxes. I find that these have been the most stable and secure of the flavors I have tried.
Knoppix really was designed for older boxes and is really a very sweet install especially for GUI interfaced boxes. The debian auto configuration does tend to take a few extra seconds to boot the system, but becomes a breeze when the older hardware fails and different hardware is installed as no manual reconfiguration is necessary.
With the 64 Meg of RAM they currently have, they should not run into the same trouble with the X-windows. Since the knoppix runs with an on-the-fly compression system, a 2 Gig HD would be more than enough, especially if one of the 1.2 Gig drives was added for data storage. Knoppix also comes with Open Office pre installed to satisfy the need for MS Office compatible Office Suite.
Either way you go, let me know about the drive(s), I'd be happy to help out!